THIS IS A SYCAMORE SLAB, THAT IS BEING FLATTENED ON BOTH SIDES. IT IS APPROXIMATELY 12' LONG BY 30"-40" WIDE X 2' THICK. BELOW IS THIS SLAB WITH 2 PRE-COATS APPLIED, IT WILL GET 2-3 MORE COATS OF EPOXY RESIN. THE BASE WILL BE GLUED TOGETHER ON THE FLATS OF 2X12'S , CURED AND THEN SHAPED INTO PLEASING CURVES AND FINISHED WITH AN EXTERIOR GRADE TUNG OIL BY SUTHERLAND WELLS. EXPECTED COST WILL BE AROUND $5000-$6000